Operating Instructions
4
2)
Servicing Personnel:
Do not attempt to service the unit beyond that described in these operating instructions. Refer all other
servicing to authorized servicing personnel.
with the handheld remote control.It is recommended to affix the receiver on the display frame /bezel or the display stand.
4)
Safety check:
After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working
condition.
3)
Replacement parts:
When parts need replacing ensure the servicer uses parts specified by the manufacturer or parts that
have the same characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards.
5) Connect the IR TX receiving cables into IR TX port on the back panel and affix the emitter onto the source IR windows.
6) Connect IR-RX cable into IR-RX port on the receiver and affix the IR receiver in direct line of site
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of benzine to clean this unit.
1)
Damage requiring service:
The unit should be serviced by qualified service personnel if:
2) Connect Fiber cables to both fiber port of the transmitter and fiber port of the Receiver.
(d)The unit does not operate normally or exhibits a marked change in performance;
1) Connect the HDMI signal sources (Such as DVD, STB etc) to HDMI Transmitter.
3) Connect the HDMI output (Such as HD-LCD, HD-DLP) into the Receiver.
(a)The DC power supply cord or AC adaptor has been damaged;
(e)The unit has been dropped or the cabinet damaged.
(b)Objects or liquids have gotten into the unit;
4)
Connect the power supply into
Power port.
CONNECTING AND OPERATING
Attention: Insert/Extract cables gently.
(c)The unit has been exposed to rain;
PRODUCT SERVICE
TYPICAL APPLICATION
MAINTENANCE
