Pro PRO-790, Operation Manual

Page: 27 / 46

www.PrecisionRatedOptics.com | 888-545-1254 27
PRO-790
4.1.2 Cleaning Fiber Clamp Chips
If contaminants are present on the clamp chips, correct clamping may not occur, resulting in poor quality fiber
alignment splices. The fiber clamp chips should be frequently inspected and periodically cleaned.
1) Open up the wind protector
2) Clean press stand surface with an alcohol-soaked thin cotton swab .Remove excess alcohol from the press
stand surface with a clean dry swab

Check: Use a high quality alcohol greater than 99% pure cotton swab fiber press stand cleaning fiber
press stand.
Fig 4-3 Clean Pressure Foot
Pressure Foot