www.PrecisionRatedOptics.com | 888-545-1254
23
PRO-790
Note: A slightly fat splice is normal. There is no problem with the splice loss and reliability.
Note: White line or black line will appear on fiber’s joint with fluorine and titanium. Because of optics,
there’s no effect to joint.
Splice loss estimating
The estimated splice loss is displayed on the screen.
Fig.3-11 Result of Fiber Splicing
In some cases the splice loss can be improved with the re-arc feature. Press the
after re-arc discharge.
Note: There are cases when the splice loss will deteriorate after re-arc discharge
Storing splice result
Press
or open the wind protector and the splicer will automatically perform the proof test and stores the
splicing result. In the memory of the CMOS chip of the splice result. PRO-790 can store 8000 item splice result
3.8. Fiber Removal
1)
Open the wind protector
o
Check: Heater clamps should be open.
2)
Open the left sheath clamp, holding the left fiber in your hand.
3)
Open the right sheath clamp, holding the right fiber in your hand.
4)
Remove the fiber from the splicer.
Summary of Contents for PRO-790
Page 1: ...PRO 790 Fusion Splicer Operation Guide...
Page 44: ...44 888 545 1254 www PrecisionRatedOptics com PRO 790...
Page 45: ......
