20
Step 3
Parts:
Mounting:
Loosen and remove the little screws intended for the mounting of the number
plate holder from the light holder rail and fasten the number plate holder to the
rail. The number plate holder has to be level with the lighting.
With the cable ties supplied with the carrier, the light cable can be fastened
neatly at the bottom of the carrier. Make sure the cable will not interfere with the
tilting mechanism.
Slide the twelve short, black straps through the little
slots in the wheel holder, starting inside-out, going
around the wheel holder and then outside-in (see
picture).
Finally clip the four plastic covers over the middle of the
four wheel holders.
End result:
Summary of Contents for AMBER IV DELUXE
Page 2: ...2...
Page 8: ...8 STELHOLDERNE...
Page 21: ...21 LOCKABLE FRAMEHOLDERS...
Page 31: ...31 EXPLODED VIEW...
