MTD2.4
DOC REVISION: 1
8
4.
INSTALLATION
4.1
Original Cars
To install the MTD 2.4 in original cars, you must use the adapter with the OBDII
connector.
1) The MTD must be securely attached to the vehicle.
2) The standard 8-way female MTD connector must be connected to the male 8 way
connector of the adapter.
3) The OBDII connector must be connected to the OBDII port of the vehicle (see vehicle
manual).
4) The user must access the MTD main menu and then select the "Comms" icon to
change the communication mode to OBDII CAN.
Access icon for Communications menu.
