29
5.3 Creating a Custom Weld
2. Select one of the 3 weld types in the Main Manual Mode Screen:
• Single Weld: A single weld.
• Dual Weld: Two consecutive current pulses.
• Pulse Weld: 3-9 consecutive current pulses.
Save new selection to overwrite the current program.
1. Select the Weld Type and Cap by pressing the Weld
Cap Selection Button on the Manual Mode Screen, then
select the appropriate weld cap.
How To Create A Custom Weld:
PS-025
PS-027
PS-026
Weld
Time
Amount of time current is applied
during the weld.
Weld
Current
How much current is applied during
the weld.
Weld
Force
How much pressure is applied
during the weld.
3. Choose The Settings.
Set the desired parameters by selecting each one to be edited and modified using the open keypad.
If you selected Single Weld, you will see the following options:
5.3 Creating A Custom Weld