Pro-Sl LED-PAR 631 INT ACCU, User Manual

Page: 4 / 7

DMX mode2: 03 CHs
CH1 CH2 CH3
Red Green Blue
DMX mode3: 05 CHs,
CH1 CH2 CH3 CH4 CH5
Red 0-255 Green 0-255 Blue 0-255 Dim 0-255 Flash 0-255
5. Master/slave Mode
Press
the “MODE”, enter into master/slave mode “Slave Mode”.
6. Static Color Mode
1) Press
the “MODE”, enter into static color mode “Color Mode”.
2) Press the
“SETUP”, enter into red brightness settings menu “Red: 255”.
3) Press the
“UP” or “DOWN”, to set the red brightness “000-255”.
4) Press the
“SETUP”, enter into green brightness settings menu “Green: 255”.
5) Press the
“UP” or “DOWN”, to set the green brightness “000 -255”.
6) Press the
“SETUP”, enter into blue brightness settings menu “Blue: 255”.
7) Press the
“UP” or “DOWN”, to set the blue brightness settings menu “000-255”.
8)
Press the “SETUP”, enter into static color strobe settings menu “Flash: 000”.
9)
Press the “UP” or “DOWN”, to set the strobe value “000-100”.
7. Wireless DMX Function Setting
1) Press the “MODE”, enter into wireless DMX function setting mode “Wireless Setup”, now the fixture
operate the master/slave mode.
2)
Press the “SETUP”, enter into wireless DMX function ON-OFF setting menu “Wireless: ON”. Press the
“UP” or “DOWN”, to adjust the ON or OFF.
REMARK
1)
“Wireless: ON”: able to receive the wireless DMX signal;
2)
“Wireless: OFF”: unable to receive the wireless DMX signal;
3) Wireless DMX function setting can be applied for any operation mode;
4) If the fixture is operating as a master, close the wireless DMX mode to avoid interference between
signals.
10 90
—99
Program:02
Speed
0
—255
11 100
—109 Program:03
12 110
—119 Program:04
13 120
—129 Program:05
14 130
—139 Program:06
15 140
—149 Program:07
16 150
—159 Program:08
17 160
—169 Program:09
18 170
—255
SOUND
Sensitivity
0
—255