WHAT’s IN THE BOX
OVERVIEW
IMPORTANT SAFETY INFORMATION
INSTALLATION
•
Active type, including transmitter and receiver.
•
This device transmits high resolution 1920 x 1200 VGA signal with audio over cost
effective CAT5 cable up to 70 meters instead of VGA and Audio cable.
•
External power required at transmitter unit, no power requested at receiver unit.
•
Main transmitter and receiver units.
•
5V DC Power Supply
•
User’s Manual
Please read these instructions carefully before use and retain for future reference.
•
Check that the voltage indicated on the PSU rating plate corresponds with that of the
local network before connecting to the mains power supply.
Cable:
•
Video Link cable using high quality CAT5E UTP/STP or CAT6 UTP cable.
•
Please noted STP cable could enhance noise rejection, but also less transmission
range and picture sharpness quality.
RJ45 cable connections:
•
Link Cable (TIA/EIA-568-B )
1. Orange-white
Blue -
2. Orange
Blue +
3. Green-white
Green -
4. Blue
+12V/Audio +
5. Blue-white
GND /Audio -
6. Green
Green +
7. Brown-white
Red –
8. Brown
Red +
NOTE
:
The cabling must be kept away from any equipment with electromagnetic wave, i.e.:
microwave, radio equipment, high voltage lines.
