LASER DEVICE
NEVER LOOK INTO THE LASER BEAM.
Any contact with the eyes by the
beam could cause injury. Do not use the laser when cutting reflective materials.
DO NOT AIM THE LASER BEAM AT ANYONE OR AT REFLECTIVE SUR-
FACES.
Any contact with the eyes by the beam could cause injury. Ensure the
laser beam is turned on only when the tool is on a non-reflective workpiece and
as such it is aimed only at the work surface. Metals and other materials like
steel, which can be highly reflective should only be cut without the use of the laser.
STORE OUT OF REACH OF CHILDREN.
Equipment should be in a high loca-
tion or locked up to keep out of reach of children. It is not a toy.
DO NOT TAMPER WITH THE LASER OUTPUT.
Changing the performance of
the laser to increase its output is prohibited. Any claim for damages or injuries
resulting from not following these instructions will be refused.
SAFETY PRECAUTIONS
SPECIFICATIONS
Figure 1 names the major components of the CSW164 circular saw:
FUNCTIONAL DESCRIPTION
15
ENGLISH
4.
1.
2.
3.
4.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
Lower blade guard lever
Cutting depth adjustment lock lever (between handle and guard)
Dust port
Hand grip
On/Off trigger switch
Trigger interlock button (on left side of handle)
Laser switch
Auxiliary front handle
Spindle lock button
Bevel adjustment lock knob (front)
Button of laser cover
Rip guide clamp knob
Hex socket head spindle bolt
Rotating lower blade guard
Base plate
Voltage: 120 volts AC, 60 Hz
Current rating: 11 amp
No-load speed: 4,200 RPM
Maximum cutting depth @ 90º: 2-7/16” (62 mm)
Maximum cutting depth @ 45º: 1-9/16” (40 mm)
Can be used to cut wood and plastic
Laser line provides clear, accurate cutting line
Soft grip for comfortable use
Easy carbon brush changes, no disassembly required
1 year warranty
Accessories:
24-tooth tungsten carbide tipped, 7-1/4” (185 mm) saw blade
Hex wrench
Rip fence
Fig. 1
Wet lumber, green lumber or pressure-treated lumber require extra attention
during cutting operations to prevent kickback.
E
F
B
D
N
A
C
O
I
L
G
H
J
M
K