8980773
Metal Vibratory Tumbler
V1.0
8
For technical questions call 1-800-665-8685
Degreasing
Ground corncob, walnut shell or plastic media. Tumble
between 30 to 60 minutes. You can add an abrasive
powder to plastic beads.
Rust Removal Treated plastic media. Tumble for 2 to 6 hours.
Polishing
Ground corncob or walnut hull. You can include a small
amount of metal polish. Do not add water. Tumble for 30
to 60 minutes.
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient,
easier to control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace damaged
or worn components. Only use identical replacement parts when
servicing.
3. Keep the tool clean, dry and free from oil/grease at all times.
4. Maintain the tool’s labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd. for
replacements.
Media Type
Abrasive
Application
Plastic Beads
Fine Silicate
Light cut-down of metal, surface
prep for polishing
Plastic Beads
Medium Silicate
Medium cut-down of metal,
deburring
Plastic Beads
Coarse Aluminum
Oxide
Heavy cut-down of metal,
deburring
Walnut Shell
Rouge
Polishing, oxide removal
Walnut Shell
None added
Polishing, final polish
Linde A
None added
Polishing, final polish
Red Rouge
Rough polish
Powdered Polishing Additive
Ruby Powder
Medium polish
Powdered Polishing Additive
Alumina Powder
Finish polish
Powdered Polishing Additive
Table 1