V1.0
Metal Cutting Scroll Saw
8896235
Visit www.princessauto.com for more information
9
6. Do not wrap cord around the tool as sharp edges may cut insulation
or cause cracks if wound too tight. Gently coil cord and either hang on
a hook or fasten with a device to keep cord together during storage.
LOW VOLTAGE
Low voltage may cause overheating due to higher power current being
drawn to the tool that will shorten the motor life.
An extension cord may cause a drop in power to the tool if it is too long
or the amperage rating is not correct. This may result in the following:
1. The tool will not activate when switched on.
2. The tool may switch on, but fails to maintain power when operated.
3. The tool may overheat, possibly starting a fire.
Test the tool by plugging it directly to the power supply. If it powers on,
change the extension cord with the correct rating and as short as needed.
The workpiece may also need to be relocated closer to the power supply.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace
the missing part before operating. Failure to do so could result in
a malfunction and personal injury.
Remove the parts and accessories from the packaging and inspect for
damage. Make sure that all items in the contents are included.
Contents: • Scroll Saw • Plain End blade adapter (upper and lower)
• Saw Blade • Hex Keys (2)
