8822611
Solid Deck Cargo Ramp
V1.0
4
For technical questions call 1-800-665-8685
1. Use the correct tool for the job. This tool was designed for a
specific function. Do not modify or alter this tool or use it for an
unintended purpose.
2. Do not use the tool if any parts are damaged, broken or misplaced.
Repair or replace the parts.
3. Never overload ramps. Maximum capacity for your ramp is
1,200 lb. (Evenly distributed load).
4. Always use safety strap to securely fasten the ramp to the vehicle.
This prevents the ramp from slipping off the back of the truck.
5. Carefully roll or winch equipment up or down the ramp. Never drive
or ride your equipment while loading or unloading.
6. Make sure the ramp is aligned with the wheels of the equipment
being loaded or unloaded.
7. Always load or unload on a solid, level and stable surface with the
vehicle in gear, the parking/ emergency brake on, and engine off.
8. Use as a loading ramp only.
9. Ramp surfaces must be clean, dry and free from oil, grease or water.
10. Maximum recommended height is 30 inches.
11. Inspect ramp before each use. Tighten any loose hardware. Replace
any worn or damaged parts. Replace safety strap if webbing is
frayed or worn. Do not attempt to use a ramp that is damaged in any
way. No modification, alteration, or deviation to the ramp are
authorized by the manufacturer. Proper care and maintenance of the
ramp are essential to safety.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace
the missing part before operating. Failure to do so could result in
a malfunction and personal injury.
Remove the parts and accessories from the packaging and inspect for
damage.
Contents: • Cargo Ramp • Carry Handle
• Safety Chains