V1.0
1,500 LB 84 X 54 IN. ALUMINUM TRI-FOLD RAMP
8817801
Visit www.princessauto.com for more information
5
UNPACKING
WARNING! Do not operate the device if any part is missing.
Replace the missing part before operating. Failure to do so
could result in a malfunction and personal injury.
Remove the parts and accessories from the packaging and inspect
for damage. Make sure that all items in the contents are included.
Contents: • Ramp
• Safety Straps • Rubber Tipped Holds
ASSEMBLY & INSTALLATION
1. Park the carrying vehicle or trailer on a flat surface capable
of supporting the load. Engage the parking brake and turn
the engine off.
2. Remove the tailgate from a pickup truck for safety.
3. Place the folded ramp on the left side of the truck or trailer
bed, making sure the tips have a solid contact with the bed.
4. Unfold the ramp to the right. The tips for each section
should also have a solid contact with the bed.
5. Secure the sides of the ramp with the safety straps. Wrap
each strap around a rung. Slide the hook through the
strap’s loop and tighten it.
5.1 Place each hook on a solid part of the vehicle’s frame.
5.2 Tighten each strap to secure the ramp. Test the ramp
by pulling backward on it. Ensure the safety straps do
not allow rearward movement.
6. Clean the ramp’s surface of dirt and oil. Dry the ramp to
eliminate a slick surface.
SIDE RUNNERS
The side runners are designed to protect a snowmobile’s skis
during loading. Remove the runners by unscrewing the
stainless steel screws.