V1.0
8 in. BENCH GRINDER WITH PCB LCD READOUT
8712135
Visit www.princessauto.com for more information
11
ASSEMBLY & INSTALLATION
Numbered references in parenthesis (#1) refer to the included
Parts List. Letter references in parenthesis (A) refer to the
included Identification Key. Dashed numbers in parenthesis
(Fig. 1-1) refer to a specific point in an illustration or image.
TOOL REST AND EYESHIELD ASSEMBLY
COMPONENTS
A 3/8-16 x 3/4 in. Hex Bolt, 4 each
B 3/8 in. Flat Washer, 6 each
C Tool Rest Bracket (left & right),
2 each
D Tool Rest (left & right), 2 each
E 5/16 in. Flat Washer, 2 each
F 5/16-18 x 1 in. Knob, 2 each
G #10-24 x 1/2 in. Pan Head Screw,
4 each
H Upper Eyeshield Bracket, 2 each
(left and right)
I
Eyeshield, 2 each
J Lower Eyeshield Bracket, 2 each
K 3/8 in. Lock Washer, 2 each
L 1/4-20 x 3/8 in. Knob, 2 each
M Spark Guard (left and right),
2 each
N 3/8-16 x 1/2 in. Knob, 2 each
TOOL REST ASSEMBLY
1. Place tool rest (D) over tool rest bracket and secure in position
with 5/16 in. flat washer (E) and 5/16-18 x 1 in. knob (F).
2. Attach tool rest bracket to the bottom of the left wheel
guard using two 3/8-16 x 3/4 in. hex head bolts (A) and two
3/8 in. flat washers (B). Tighten bolts finger tight.
Fig. 1
