1/2 IN. DR ELECTRIC IMPACT WRENCH
6
For technical questions call 1-800-665-8685
V 3.03
8340507
VIBRATION PRECAUTIONS
This tool vibrates during use. Repeated or long-term exposure
to vibration may cause temporary or permanent physical injury,
particularly to the hands, arms, and shoulders.
1. Anyone using vibrating tools regularly or for an extended period
should first be examined by a doctor and then have regular medical
check-ups to ensure medical problems are not being caused by,
or worsened from, tool use. Pregnant women or people who have
impaired blood circulation to the hands, past hand injuries, nervous
system disorders, diabetes, or Raynaud’s Disease should not use
this tool. If you feel any medical symptoms related to vibrations
(such as tingling, numbness, and white or blue fingers), seek
medical attention as soon as possible.
2. Do not smoke during use. Nicotine reduces the blood flow to the
hands and fingers, and increases the risk of vibration-related injury.
3. Wear suitable gloves to reduce the vibration effects on the user.
4. Use tools with the lowest amount of vibration when there is a
choice between different processes.
5. Do not use for extended periods. Take frequent breaks when using
this tool.
6. Let the tool do the work. Grip the tool as lightly as possible (while
still keeping safe control of it).
7. To reduce vibrations, maintain the tool as explained in this manual.
If abnormal vibrations occur, stop using this tool immediately.
TOOL USE AND CARE
WARNING! Do not use the tool if the trigger does not function properly.
Any tool that cannot be controlled with the ON / OFF switch is
dangerous and must be repaired.
1. Use the correct tool for the job. Maximize performance and safety
by using the tool for its intended task.
2. This tool was designed for a specific function.
Do Not:
a.
Modify or alter the tool, all parts and accessories are designed
with built-in safety features that may be compromised
if altered.
b.
Use the tool in a way for which it was not designed.
3. Avoid unintentional starts. Be sure the trigger switch is in the OFF
position when not in use and before connecting it to any
power source.
