1/2 IN. DR ELECTRIC IMPACT WRENCH
4
For technical questions call 1-800-665-8685
V 3.03
8340507
SPECIFIC SAFETY PRECAUTIONS
1. Do not over-tighten nuts. They could shatter and cause damage
to the tool or work piece or cause injury. Use a torque wrench to
torque the nut after using the impact wrench.
2. Do not use any additional force upon the wrench in order to
remove a nut.
3. Do not allow the wrench to run without load for an extended
period of time, as this will shorten its life.
4. This tool will not stop moving immediately. Do not lay the tool
down or leave it unattended until it has come to a complete stop. A
part that is moving could make the tool jump or grab a surface and
pull the tool out of your control.
5. When operating the tool, use proper eye and hearing protection as
well as protective gloves.
6. To maintain complete control, firmly hold your tool with both
hands. Do not place hands over air vents. Do not touch the
metal parts.
7. Never point the tool towards yourself. If it should slip, part of your
body could come in contact with moving parts.
8. Never force the tool. Excessive pressure could bend or break the
tool or accessory resulting in damage to the tool, your work piece,
or serious personal injury. If your tool runs smoothly under no load
but does not run smoothly under load, then excessive pressure is
being used.
9. Use an appropriate dust respirator when working for an extended
period of time. This will help prevent breathing in the fine dust
created while working.
10. After changing the sockets and accessories or making adjustments,
make sure any other adjustment devices are securely tightened.
Loose adjustment devices could be violently thrown.
11. Always use the correct socket that matches the drive size.
Improper use could lead to possible injury to the operator, and
damage to the tool or work piece.
12. Always check sockets and accessories for damage before each use.
Damaged sockets and accessories can break during use and cause
serious injury.
