10.8V Li-ion Cordless Mini Drill Driver
10
For technical questions call: 1-800-665-8685
V 2.0
8380271
MAINTENANCE
Before making any adjustments or changing any accessory, turn off the tool and unplug it from its power source.
1. Check for damaged parts. Before using any tool, any part that appears to be damaged should be carefully
checked to determine that it will operate properly and perform its intended functions. Check for alignment and
binding of moving parts, for broken parts or mounting fixtures, or for any other condition that may affect proper
operation. Any part that is damaged should be repaired or replaced by a qualified technician.
2. When servicing, use only identical replacement parts. Only use accessories intended for use with this tool.
Replace damaged parts immediately.
3. Keep the tool clean. Wipe the tool with a clean cloth and periodically blow out all areas with compressed air.
If compressed air is not available, use a brush to remove dust from all areas. Do not use harsh chemicals or
solvents to clean the tool. These chemicals could seriously damage the plastic housing.
4. Regularly inspect all mountings and screws to ensure tightness. Should any screws become loose,
tighten immediately.
5. If repairs are required, bring your tool to an authorized service center.
REPLACING CARBON BRUSH
1 Replacement procedure is as follows:
• Use T8 size bit to loosen the side panel
screws and remove side panel by hand.
(Fig.10)
• Take out the carbon brushes on both sides.
(Fig.11)
• Put the new carbon brush and side panel
into the hosing in proper order. Refer to
picture for the direction of installing the
carbon brush. (Fig.12-13)
• Lock the side panel clockwise by using T8
size bit. (Fig.14)
CAUTION! Always be sure that the machine is
switched off and is unplugged from the power
outlet removed before carrying out any work
on the machine. To maintain product safety and
reliability, repairs, maintenance or adjustment
should be carried out by an authorized service
center.
DISPOSING OF THE TOOL
If your tool has become damaged beyond repair, do not throw it out. Bring it to the appropriate recycling facility.
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
