pro master FL190, User Manual, Page: 21 / 40

19
Wireless Flash
In the Master flash mode, the FL190 will transmit an Optical Pulse signal to other slave
flashes with the same system (FL 190 for Canon will control other FL190’s for Canon or
other Canon brand flashes. FL190 for Nikon will control other FL190’s for Nikon or other
Nikon brand flashes).
When set as a slave, the FL190 can receive signals from models of the same brand.
(FL190 or Canon Brand for FL190 for Canon, FL190 or Nikon Brand for FL190 for Nikon.)
Set the Flash to Master Mode
To set the FL190 to the Master Mode, press the ZOOM button for three seconds. The
remote flash icon will appear and OFF flashes on the LCD. Use the select dial to choose
Master, then press the Select/Set button to confirm. To set the channel or power ratio,
press the ZOOM button until the desired option flashes. Rotate the Select Dial to choose
the desired option then press the Select/Set button to confirm the setting.
Set the Flash to Slave Mode
To set the FL190 to the Master Mode, press the ZOOM button for three seconds. The
remote flash icon will appear and OFF flashes on the LCD. Use the select dial to choose
Slave, then press the Select/Set button to confirm. To select the channel or slave group,
press the ZOOM button until the item you wish to adjust flashes. Use the Selection Dial to
adjust the setting, then press the Select/Set button to confirm the setting.