pro master FL190, User Manual, Page: 12 / 40

10
Multi Mode is a stroboscopic flash mode where a rapid series of flashes is fired. It can
be used to capture multiple images of a moving subject in a single photograph. To
achieve this effect your camera’s shutter must remain open. You can set the firing
frequency (number of flashes per second expressed as Hz), the number of flashes, and
the flash output. To set, press the MODE button until Multi is displayed on the LCD.
Press the select button and use the select dial to adjust flash output, the number of
flashes and firing frequency. Once these are set, press the Select/Set button to confirm
the setting. The output may be adjusted to 1/128-1/64-1/32-1/16-1/8-1/4, flash
frequency may be set from 1~100.
Note: The operation of high frequency flash may be impacted by the state of your
batteries not allowing the flash to recycle fast enough. If you experience problems,
reduce the flash frequency or replace your batteries with a fresh set.