Undo impellor retaining nut (LH thread) and remove impellor.
Undo fixings which retain motor within oven chamber.
Replace in reverse order.
Neons
Remove crown plate or Counter model (Refer to Siting section).
Remove electrical connections.
Undo neon retaining nut and remove neon.
Replace in reverse order.
Elements
Remove shelf hangers.
Slacken baffle fixings and lift from keyhole slots.
Undo element fixings from inside the oven.
Withdraw elements, take care not to pull the wires.
Undo element connections and replace in reverse order.
Mains Power Cable
Remove outer back.
Remove cable from terminal block.
Replace in reverse order and ensure cable is pulled taught and tightened in a manner which securely
grips the cable within the fitting.
Terminal Block
Remove outer back.
Remove internal wiring from terminal block, noting the positions.
Undo block fixings and remove.
Replace in reverse order.
Summary of Contents for LD64
Page 8: ...LD64 WIRING DIAGRAM ...