«VALUE» MODE
«
VALUE
» mode – recognition and summation mode for a stack of EURO banknotes with
mixed denominations. This mode is designed only to count EURO banknotes from the 2002
series. The counting speed in this mode is 1200 banknotes per minute. This mode is
recommended for counting and verification of a stack of banknotes with mixed denominations
by MT, MG, UV, DEN detection with a small volume. The recommended maximum load of
banknotes on the hopper is 100 banknotes. In this mode, the counter is sensitive to the
placement of the banknotes, irrelevant marks, dirt, a banknote’s loss of color, crumpled
banknotes, banknotes with curved edges or corners, and taped or glued banknotes.
Select «
VALUE
» or «
SORT
» mode by pressing the «
VALUE
», «
SORT
» buttons. The second
pressing of these buttons allow to enter the «
COUNT
» mode.
8
«COUNT» mode – counts banknotes of different
currencies in a normal mode
If you choose the «
COUNT
» mode, the counter only does normal counting:
- Counts banknotes’ quantity «
COUNT
»
- Summation «
ADD
»
- Batch mode «
BATCH
»
- Optical density detection «
DEN
»
- Ultraviolet detection «
UV
»
NOT AVAILABLE: Recognition and summation by denomination, MT and MG detection.
8.1 Counting Operation
WARNING
! In order to avoid errors during counting, examine banknotes and put aside the
following:
- Any banknote that has been repaired with white paper, has been exposed to water or
“washed”, and any banknote that is dirty or torn
WARNING
! Adjust the auxiliary hopper plates (Figure 1-4) in accordance with the banknotes’
size.
Banknotes shall be placed in a neat stack before being placed into the hopper!
- Banknotes are to be placed in the hopper
- The counter will start counting banknotes automatically after one second
Fig.6
Fig.7
8
English
Summary of Contents for PRO 86 MIX EURO
Page 17: ...17 English...
Page 31: ...31 Deutsch...