Pro-Line Boats PRO 86 MIX EURO, Manual, Page: 11 / 32

If an error occurs again on the same banknote, put it upside down in the hopper again. If the
above steps do not help, the banknote cannot be recognized as an authentic one and other
methods of verification should be used, such as UV or IR. If an error occurs during counting,
you can also reference the Error Code Table.
10 «VALUE» mode – counts and summates the
banknotes’ denominations
This counting mode recognizes the denominations of EURO banknotes and completes
counting and summation operations for a stack of banknotes of mixed denominations. The
display shows detections included into MT, MG, UV, DEN.
- To start, repeat counting operations under cl. 9.1; (9.2).
- To avoid additional errors during counting, it is recommended to pre-sort banknotes by their
size (for example, a 5 EURO banknote is significantly different in size from other
denominations),starting with larger denominations and progressing to smaller ones.
- The display will show the quantity (PCS) and the total value of (TOTAL) counted banknotes:
11 Adjustment of sensors
« CF » button – enters UV and DEN detection menu. When pressing “ CF ” button the changing
UV value starts to blink. In different modifications standard detection levels MT-I MG-I
UV-I DEN-II are set by default for «
VALUE », « SORT » and « COUNT » modes.
UV detection level is set within 0 – IIII range (depending on the counter modification). The
higher the level, the higher sensitivity and the more precise a banknote’s checking. Press
«+1» и «-1» buttons to make changes. Press the “ START ” button to exit.
When pressing the button for the second time the changing DEN value starts to blink. DEN
detection level is set within 0 – IIII range. The higher the level, the higher sensitivity and the
more precise a banknote’s checking. Press «
+1 » и « -1 » buttons to make changes. Press the
“ START ” button to exit.
In case of high UV and DEN detection levels, CF1, Ed errors are possible, that is why it is
recommended to use standard detection levels MT-I, MG-I, UV-I, DEN-II by default.
Fig. 12
Fig. 13
PCS
TOTAL
11
English