Pro-Line Boats 21 DC, Owner'S Manual

Page: 19 / 24

Storage: Do not fold or store any canvas while wet. All canvas should be rolled or folded when dry
and kept in a clean dry location.
Upholstery
Vinyl
An occasional wipe down with mild soap and water is all your interior and exterior vinyls need to
remain in good condition for many years. We do not recommend the use of any special cleaners
sealers or treatments for interior and exterior vinyls. Refer to the provided brochure.
Fabric
For all fabrics use dry cleaning fluid only.
Corrosion Protection
Your motor / drive unit has a sacrificial anode made of zinc to mitigate the effects of corrosion
causing, electrolysis . Maintain this anode in accordance with the maintenance schedule in your
engine manual. If you moor your Pro Line in salt water for extended periods make sure to check
the anti-corrosion anode often for operation. Make sure the anode surface is exposed and not caked
with corrosion and scale. If the anode is eroded renew it.
Winterization and Storage
Pre-Storage Check List

Remove drain plug, keep bow high to drain any water accumulation.

Drain all water from water systems, pumps, valves, drains and lines. Blown air can be used
to help remove water.

Fill fuel tank and add a stabilizer such as 'STA-BIL' to the gasoline.

Prepare the engine in accordance with manufactures recommendations found in your
engine manual.

Treat metal parts with rust inhibitor.

Remove the battery and protect it from freezing. Trickle charge overnight once a month.

Place under cover, if on a trailer loosen tie down straps, and unload the tires with blocks.
Fitting Out After Storage-

Check entire fuel system for loose fittings, leaks and damage.

Clean battery terminals, install battery(s), and coat terminals with a deoxidizing agent.

Check all through hull fittings and hoses for obstructions, water tightness and condition.

Test navigation, anchor and other lights for operation.

Check wiring, terminal blocks and plugs for loose connections and corrosion.

Verify controls, switch and equipment operation.

Check line condition and inspect anchor and rode.

Install hull drain plug, clean out any debris from bilge and cockpit.

Remove antifreeze and flush water system.