background image

© Audio Trade GmbH · Pro-Ject Debut Carbon/Phono USB / Ortofon OM10 · Revision 2013.11.15 

8

Service 

Should you encounter a problem which you are not able to alleviate or identify despite the above information, 
please contact your dealer for further advice. Only when the problem cannot be resolved there should the 
unit be sent to the responsible distributor in your country. 
Guarantee repairs will only be effected if the unit is returned correctly packaged. For this reason we recommend 
keeping the original packaging.  
Never return a record player without making sure that is it safely disassembled and correctly packaged in the 
original packaging according to the diagrams on the last page of this user guide. Please remove these parts 
and pack them separately: lid (10), counterweight (6), anti-skating weight (16) platter (5) and belt (3). Fit the 
cartridge protection cap. Insert the transport lock for the tonearm (18) prior to carefully packaging the record 
player. 

Warranty 

 

The manufacturer accepts no responsibility for damage caused by not adhering to these instructions 
for use and/or by transportation without the original packaging. Modification or change to any part 
of the product by unauthorized persons release the manufacturer from any liability over and above 
the lawful rights of the customer. 

Copyright, trademarks 

PRO-JECT is a Registered Trademark of H. Lichtenegger. 

This guide was produced by: Audio Trade GmbH 
Copyright 

©

 2012. All rights reserved.

 

 

The information was correct at the time of going to 
press. The manufacturer reserves the right to make 
changes to the technical specification without prior 
notice as deemed necessary to uphold the ongoing 
process of technical development.

 

Windows XP

®

, Windows Vista

®

, Windows 7

®

, Windows 8

®

 are trademarks of the Microsoft group of companies. 

Mac and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. 

Summary of Contents for Debut Carbon Phono/USB











Reviews: