9
8. While a second person holds the console as-
sembly near the Pulse Bar (66), connect the
Console Ground Wire (102) on the Pulse Bar to
the ground wire from the console assembly.
Connect the wire from the console assembly to
the Upright Wire (75).
See the inset drawing.
The connectors should slide together easily
and snap into place.
If they do not, turn one
connector and try again.
IF THE CONNEC-
TORS ARE NOT CONNECTED PROPERLY,
THE CONSOLE MAY BE DAMAGED WHEN
THE POWER IS TURNED ON.
Lay the wires in-
side the bottom of the Pulse Bar (66).
75
Console
Assembly
Wire
102
8
75
9. Set the console assembly on the Left and Right
Uprights (70, 76).
Be careful not to pinch any
wires.
Attach the console assembly to the Pulse Bar
(66) with six 3/4" Screws (23).
Start all six
Screws before firmly tightening any of them.
23
Console Assembly
23
23
70
76
9
Ground
Wire
66
66
10. Identify the Left Handrail Cover (68), which has
a LEFT sticker on it. Slide the Left Handrail
Cover onto the left Handrail (62) and hold it
against the console assembly. Tighten two
Cover Screws (52) into the Left Handrail Cover
and the Left Upright (70);
be careful not to
overtighten the Cover Screws.
Attach the Right Handrail Cover (74) in the
same way.
Console
Assembly
52
68
70
76
74
52
10
62
62
Wire