18
38
Q
3
56
12
53
18
18. Remove the 5/16" Nut (12) and the 5/16" x 2 1/4"
Bolt (3) from the bracket on the Latch Crossbar
(38).
Align the upper end of the Storage Latch (53)
with the bracket on the Latch Crossbar (38),
and insert the 5/16" x 2 1/4" Bolt (3) through the
bracket and the Storage Latch.
This will push
a spacer (Q) out of the other end; discard the
spacer.
Next, tighten the 5/16" Nut (12) onto the 5/16" x
2 1/4" Bolt (3);
do not overtighten the Nut; the
Storage Latch (53) must be able to pivot.
Then, lower the Frame (56) (see HOW TO
LOWER THE TREADMILL FOR USE on page
29).
19. Press the two tabs on the Tablet Holder (98) into
the slots (R) in the console assembly (K).
Attach the Tablet Holder (98) with four #8 x 5/8"
Machine Screws (8).
Note: Start the two top
Machine Screws
fi
rst, and then start the two
bottom Machine Screws. Be careful not to
overtighten the Machine Screws.
IMPORTANT: The Tablet Holder (98) is
designed for use with most full-size tablets.
Do not place any other electronic device or
object in the Tablet Holder.
19
98
Start First
K
R
8
Summary of Contents for PFTL79117.0
Page 5: ...5...
