18
THE INFORMATION MODE
The console features an information mode that keeps
track of treadmill usage information and allows you to
select a unit of measurement for the console. You can
also turn on and turn off the display demo mode.
To select the information mode, insert the key into the
console while holding down the Stop button. Then, re-
lease the Stop button. When the information mode is
selected, the following information will be shown:
The upper display will
show the total number of
hours that the treadmill has
been used.
The lower left display will show the total number of
miles or kilometers that the walking belt has moved.
An “E” for English miles or an “M” for metric kilometers
will appear in the lower right display. Press the Speed
increase button to change the unit of measurement, if
desired.
The console features a display demo mode, designed
to be used if the treadmill is displayed in a store. While
the demo mode is turned on, the console will function
normally when you plug in the power cord, press the
power switch into the reset position, and insert the key
into the console. However, when you remove the key,
the displays will remain lit, although the buttons will not
function. If the demo mode is turned on, a “d” will ap-
pear in the lower right display while the information
mode is selected. To turn on or turn off the demo
mode, press the Speed decrease button.
To exit the information mode, remove the key from the
console.
HOW TO USE THE DUMBBELLS
To exercise your
upper body as you
walk on the treadmill,
hold the 1-pound
dumbbells at your
sides or press the
weights above your
head.
WARNING: Do not use the dumbbells at speeds
faster than walking speeds. Using dumbbells and
not holding the handrails may compromise your
ability to maintain your balance. Exercises using
dumbbells should be attempted only by experi-
enced users.
Dumbbell Holder
All manuals and user guides at all-guides.com
