6
STEP 1
I.
Fasten front stabilizer
(39) with 2 carriage bolts (48)
from the underside of stabilizer.
Secure with 2 curved washers
(13) and 2 cap nuts (47).
II.
Fasten rear stabilizer (93)
with 2 Allen bolts (48), 2 spring
washers (15)
STEP 2
I.
Carefully lift the Handlebar Post (25) until it
is vertical. Put the front plastic cover (37) into the
Handlebar post (25). Connect the Upper Computer
Cable (28) and the Lower Computer Cable (44).
II.
Remove the loosely fitted Allen bolts (14),
spring washers (15) and curved washers (13) from
the Main Frame and lower the Handlebar Post (25)
into position. Loosely re-fit the 6 x M8 Allen Bolt
(14), 6 Spring washer (15) and 6 Curved Washers
(13) and align the Handlebar Post so it is straight
then tighten the Allen bolts fully
49
92
93
47
13
38L
39
38R
48
47
13
37
28
13
15
14
25
44
