background image

22

 5.  

Wear a compatible heart rate monitor and 
measure your heart rate if desired. 

 

 You can wear a compatible heart rate monitor to 
measure your heart rate. Note: The console is 
compatible with all Bluetooth

®

 Smart heart rate 

monitors.

 

 A compatible heart rate monitor is included with 
some models. If a heart rate monitor is included, 
see THE HEART RATE MONITOR in this manual 
to learn how to use it. 

 

 If this model does not include a compatible 
heart rate monitor, see this page for information 
about ordering one.

 

 To connect a compatible heart rate monitor to the 
console, press the iFIT Sync button on the console; 
the console pairing number will appear in the dis-
play. When a connection is established, the LED on 
the console will flash red twice. When your heart-
beat is detected, your heart rate will be shown. 
See HOW TO CONNECT YOUR HEART RATE 
MONITOR TO THE CONSOLE on page 24 for 
more information.

 6.  

When you are finished exercising, turn off the 
console.

 

 See HOW TO TURN OFF THE CONSOLE on 
page 20.

 HOW TO USE THE SOUND SYSTEM

To play music or audio books through the console 
sound system while you exercise, plug a 3.5 mm male 
to 3.5 mm male audio cable (not included) into the 
jack on the console and into a jack on your personal 
audio player; 

make sure that the audio cable is fully 

plugged in. Note: To purchase an audio cable, see 
your local electronics store.

 

Next, press the play 
button on your per-
sonal audio player. 
Adjust the volume 
level using the Vol 
increase and decrease buttons on the console or the 
volume control on your personal audio player.

 THE OPTIONAL HEART RATE MONITOR

Whether your 
goal is to 
burn fat or to 
strengthen your 
cardiovascular 
system, the key 
to achieving the 
best results is 
to maintain the 
proper heart 
rate during your 
workouts. The optional heart rate monitor will enable 
you to continuously monitor your heart rate while you 
exercise, helping you to reach your personal fitness 
goals. 

To purchase an optional heart rate monitor, 

please see the front cover of this manual.

Note: The console is compatible with all Bluetooth 
Smart heart rate monitors.

Summary of Contents for PFEL79921-INT.0





































Reviews: