Pro-Form PFEL03807.0, User Manual

Page: 10 / 32

10
9
10
9. The Console (10) can be operated with four
“D” batteries (not included); alkaline batteries
are recommended.
IMPORTANT: If the ellip-
tical exerciser has been exposed to cold
temperatures, allow it to warm to room
temperature before inserting batteries into
the Console. If you do not do this, the con-
sole displays or other electronic
components may become damaged.
Remove the battery cover from the bottom of
the Console and insert four batteries into the
battery compartment.
Make sure the batter-
ies are oriented as shown by the diagram
inside the battery compartment.
Then, reat-
tach the battery cover.
The Console (10) can also be operated with
an optional power supply (not included).
To
purchase a power supply, see the front
cover of this manual. To avoid damaging
the console, use only a manufacturer-sup-
plied power supply.
Plug one end of the
power supply into the jack on the Console;
plug the other end into an outlet installed in
accordance with all local codes and ordi-
nances.
Have a second person hold the Console (10)
near the Upright (2) as shown. Connect the
console wires to the Upper Wire Harness (18)
and the Pulse Wire (11). Attach the Console
(10) to the Upright (2) with four M4 x 16mm
Round Head Screws (72).
Be careful to
avoid pinching the wires.
10. Identify the Left Upper Body Arm (4), which is
marked with a “Left” sticker. Orient the Left
Upper Body Arm so that the indicated tube is
facing inward.
Lubricate the upper end of the left Upper
Body Leg (6) using a small amount of the
included high-temperature lubricant. Then,
slide the Left Upper Body Arm (4) onto the
Upper Body Leg.
Apply a generous amount of grease to the
Pivot Axle (16). Then, insert the Pivot Axle
through the Left Upper Body Arm (4), an
Upper Body Arm Spacer (29), and the
Upright (2).
Make sure the Upper Body Arm
Spacer is oriented as shown, with the
arrow pointed down.
2
10
Console Wires
11
18
72
2
4
6
29
16
Tube
Grease
Arrow
Lubricate