11
10
111
124
124
81
68
70
9
9
10. Have a second person hold the Console (9) near
the Console Bracket (124).
Connect the console wires to the Handlebar Post
Wire (68) and the Control Wires (70, 81); make
sure to connect the console wire that has an
“L” tag to the Control Wire that has an “L”
tag, and connect the console wire that has an
“R” tag to the Control Wire that has an “R”
tag.
11. Insert the excess wire into the Console (9).
Tip: Avoid pinching the wires. Attach the
Console (9) to the Console Bracket (124) with
four M4 x 16mm Screws (111); start all the
Screws, and then tighten them.
11
12
12. Note: You can attach your own pedals if
desired.
Identify the Right Pedal (62).
Using the included flat wrench tool, firmly
tighten the Right Pedal (62) clockwise into the
Right Crank Arm (64).
Firmly tighten the Left Pedal (not shown)
counterclockwise into the Left Crank Arm
(not shown). IMPORTANT: You must turn the
Left Pedal counterclockwise to attach it.
62
64
Avoid
pinching
the wires
