22
HOW TO MAINTAIN THE EXERCISE BIKE
Regular maintenance is important for optimal
performance and to reduce wear. Inspect and properly
tighten all parts each time the exercise bike is used.
Replace any worn parts immediately.
To clean the exercise bike, use a damp cloth and a
small amount of mild detergent. IMPORTANT: To
avoid damage to the console, keep liquids away
from the console and keep the console out of
direct sunlight.
HOW TO TROUBLESHOOT THE CONSOLE
If the console display becomes dim, replace the
batteries (see assembly step 10 on page 12); most
console problems are the result of low batteries.
If the message CH0 or CH1 appears in the display
when you press the increase and decrease buttons,
see assembly step 13 on page 13. First, pull out the
wire protector and pull out the wires. Then, disconnect
the console wire from the upper wire, and then recon-
nect the wires; make sure to align the connectors
properly and make sure to press the connectors
together firmly. Then, press the wire protector into the
handlebar.
HOW TO ADJUST THE REED SWITCH
If the console does not display correct feedback, the
reed switch should be adjusted.
To adjust the reed switch, locate the Reed Switch (57)
on the left side of the exercise bike. Slightly loosen the
two M4 x 20mm Screws (81).
Next, turn the Left Crank Arm (19) until a Magnet (62)
is aligned with the Reed Switch (57). Slide the Reed
Switch slightly toward or away from the Magnet. Then,
retighten the M4 x 20mm Screws (81).
Turn the Left Crank Arm (19) for a moment. Repeat
the procedure above, if necessary, until the console
displays correct feedback.
19
81
62 57
MAINTENANCE AND TROUBLESHOOTING
Summary of Contents for LE TOUR DE FRANCE CLC
Page 4: ...4 STANDARD SERVICE PLANS ...
