19
3. Start the workout.
Press the Start button or the Speed increase button
to start the workout. A moment after you press the
button, the treadmill will automatically adjust to the
first speed and incline settings of the workout.
Each workout is divided into one-minute segments.
One speed setting and one incline setting are
programmed for each segment. Note: The same
speed setting and/or incline setting may be pro-
grammed for consecutive segments
During the
workout,
the profile
will show
your dog's
prog-
ress. The
flashing
segment of the profile represents the current seg-
ment of the workout. The height of the flashing
segment indicates the approximate speed setting
for the current segment.
At the end of each segment of the workout, a
series of tones will sound and the next segment of
the profile will begin to flash. If a new speed and/or
incline setting is programmed for the next segment,
the new speed and/or incline setting will appear in
the displays for a few seconds and the treadmill
will automatically adjust to the new speed and/or
incline setting.
The workout will continue in this way until the last
segment of the pro
le
ashes in the display and the
last segment ends. The walking belt will then slow
to a stop.
If the speed or incline setting is too high or too
low for your dog at any time during the workout,
you can manually override the setting by pressing
the Speed or Incline buttons;
however, when the
next segment of the workout begins, the tread-
mill will automatically adjust to the speed and
incline settings programmed for the next seg-
ment.
To stop the workout at any time, press the Stop
button. The time will begin to flash in the display.
To resume the workout, press the Start button or
the Speed increase button. The walking belt will
begin to move at 1 mph. When the next segment of
the workout begins, the treadmill will automatically
adjust to the speed and incline settings for the next
segment.
4. Follow your dog's progress with the display.
See step 5 on page 17.
5. When your dog is finished exercising, remove
the key from the console.
See step 6 on page 18.
HOW TO USE A SET-A-GOAL WORKOUT
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on
page 17.
2. Select a set-a-goal workout.
To use a set-a-goal workout, press the Set A Goal
button on the console, and then press the increase
and decrease buttons next to the Enter button to
select a calorie, time, or distance goal. Then, press
Enter.
Next, press the increase and decrease buttons
next to the Enter button to select a goal. Press the
Select Speed and Select Incline buttons to select
the speed and incline for the workout. The screen
will show the duration and distance of the workout,
and the approximate number of calories you will
burn during the workout.
Profile
