18
The matrix offers several display tabs. Press the
increase and decrease buttons next to the Enter
button or press the Display button until the desired
tab is shown.
The Incline tab will show a pro
le of the incline set-
tings of the workout. A new segment will appear at
the end of each minute.
The Speed tab will show a pro
le of the speed set-
tings of the workout.
The My Trail tab will show a track that represents
1/4 mile (400 m). As your dog exercises, the
ash-
ing rectangle will show your dog's progress. The
My Trail tab will also show the number of laps
completed.
The Calorie tab will show the approximate amount
of calories your dog has burned. The height of
each segment represents the amount of calories
burned during that segment. Note: When you
select the Calorie tab, the calorie display will show
the approximate number of calories burned per
hour.
As your dog exercises, the workout intensity level
bar will indicate the approximate intensity level of
the exercise.
Press the Home button to return to the default
menu (see HOW TO CHANGE CONSOLE
SETTINGS on page 21 to set the default menu).
If necessary, press the Home button again.
When a wireless iFit module
is connected, the wireless
symbol at the top of the dis-
play will show the strength of
your wireless signal. Four arcs
indicate full signal strength.
To exit the manual mode or a workout, press the
Home button. If necessary, press the Home button
again.
Change the volume of the
console by pressing the vol-
ume increase and decrease
buttons.
6. When your dog is finished exercising, remove
the key from the console.
Decrease the speed gradually, and then press the
Stop button. Next, remove the key from the console
and put it in a secure place.
When you are finished using the treadmill, press
the power switch into the off position and unplug
the power cord.
IMPORTANT: If you do not do
this, the treadmill’s electrical components may
wear prematurely.
HOW TO USE AN ONBOARD WORKOUT
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on
page 17.
2. Select an onboard workout.
To select an onboard workout, press the 18
Onboard Workouts button repeatedly until the
desired workout appears in the display.
When you select an onboard workout, the display
will show the maximum incline, the duration, the
distance, and the maximum speed of the workout.
In addition, a profile of the speed settings of the
workout will appear in the matrix.
