11
7. Have a second person hold the Console (72)
near the Upright Wire (78).
Connect the Upright Wire (78) to the console
wire.
See the inset drawing. The connectors
should slide together easily and snap into
place.
If they do not, turn one connector and try
again.
IF YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER.
Remove the wire tie from the Upright Wire (78).
7
78
6. Set the Console (72) face-down on a soft surface
to avoid scratching the console.
Attach the Console Bracket (73) to the Console
(72) with four #8 x 1/2" Screws (4);
do not over-
tighten the Screws.
6
73
72
72
4
Wire
Tie
78
Console
Wire
Console
Wire
