background image

13

HOW TO MOVE THE ELLIPTICAL

Due to the size and weight of the elliptical, moving 
it requires two persons.

 Stand in front of the elliptical, 

hold the upright, and place one foot against one of the 
front wheels. Pull on the upright and have a second 
person lift the handle on the rear of the frame until the 
elliptical will roll on the front wheels. Carefully move the 
elliptical to the desired location, and then lower it to the 
floor.

HOW TO LEVEL THE ELLIPTICAL

If the elliptical rocks slightly on your floor during use, 
turn one or both of the leveling feet beneath the rear 
stabilizer until the rocking motion is eliminated. 

HOW TO EXERCISE ON THE ELLIPTICAL

To mount the elliptical, hold the handlebars and step 
onto the pedal that is in the lowest position.

 

Next, step 

onto the other pedal. Push the pedals until they begin 
to move with a continuous motion. 

Note: The crank arms can turn in either direction. 
It is recommended that you turn the crank arms 
in the direction shown by the arrow; however, for 
variety you can turn the crank arms in the opposite 
direction.

To dismount the elliptical, wait until the pedals come to 
a complete stop. 

Note: The elliptical does not have 

a free wheel; the pedals will continue to move until 
the flywheel stops. 

When the pedals are stationary, 

step off the higher pedal first. Then, step off the lower 
pedal.

Pedals

Crank Arm

Handlebars

Place 

your foot 

here

Lift here

Pull on 
upright

Summary of Contents for 940 CE





























Reviews: