11
10. Plug the Power Cord (55) into the power
socket at the rear of the elliptical (see HOW
TO PLUG IN THE POWER CORD on page
12).
IMPORTANT: If the elliptical has been
exposed to cold temperatures, allow it to
warm to room temperature before plugging in
the power cord. If you do not do this, the con-
sole displays or other electronic components
may become damaged.
Note: When you plug in the elliptical for the
first time (see HOW TO PLUG IN THE POWER
CORD on page 12), the Ramp (not shown)
will calibrate automatically.
The Ramp will
move upward and downward as it calibrates.
When the Ramp stops moving, the Ramp is
calibrated.
IMPORTANT: If the Ramp (not shown) does
not calibrate automatically, see HOW TO
CALIBRATE THE RAMP on page 22 and
manually calibrate the Ramp.
10
9. Identify the Right Handlebar (31) and orient it as
shown. Attach the Right Handlebar to the right
Upper Body Arm (12) with two 5/16" x 1 1/2"
Bolts (73) and two 5/16" Locknuts (106).
Make
sure that the Locknuts are in the hexagonal
holes.
Repeat this step to attach the Left Handlebar
(7) to the left Upper Body Arm (12).
9
31
106
73
7
12
55
12
11.
Make sure that all parts of the elliptical are properly tightened.
Note: Extra parts may be included. To
protect the floor or carpet from damage, place a mat under the elliptical.
Hexagonal
Holes