11
9. With the help of a second person, hold the con-
sole assembly near the Left Handrail (71) and
the Right Handrail (not shown).
Connect the Upright Wire (70) to the console
wire.
See the inset drawing. The connectors
should slide together easily and snap into
place.
If they do not, turn one connector and try
again.
IF YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER.
Then, remove the wire tie from
the Upright Wire.
9
Console
Assembly
70
70
Wire
Tie
Console
Wire
Console
Wire
71
10. Set the console assembly on the Left and Right
Handrails (71, 72).
Make sure that no wires
are pinched.
Insert the excess Upright Wire (70)
into the Left Handrail.
Attach the console assembly to the brackets on
the Handrails (71, 72) with two 5/16" x 1" Screws
(7) and two 5/16" Star Washers (8);
do not fully
tighten the Screws yet.
71
Console
Assembly
7
7
8
8
70
72
10
