12
15
15. The Console (66) requires two AA batteries (not
included); alkaline batteries are recommended.
Do not use old and new batteries together or
alkaline, standard, and rechargeable batter-
ies together. IMPORTANT: If the Console has
been exposed to cold temperatures, allow
it to warm to room temperature before you
insert batteries. Otherwise, you may dam-
age the console display or other electronic
components.
Carefully pry the Console (66) out of the Shields
(44, 69); be careful not to pull on the wire
attached to the Console. Next, remove the
screw (not shown) and the battery cover from
the back of the Console. Insert batteries into the
battery compartment; make sure to orient the
batteries as shown by the diagram inside the
battery compartment. Then, reattach the bat-
tery cover with the screw, and press the Console
into the Shields.
16. Make sure that all parts are properly tightened before you use the rower. Extra parts may be included.
Place a mat under the rower to protect the floor.
66
69
44
52
50
51
14
14. Attach a Foot Plate (52) to one side of the Front
Stabilizer (50) with a Foot Plate Pin (51).
Attach the other Foot Plate (not shown) to the
other side of the Front Stabilizer (50) in the
same way.
