10
9
63
20
80
82
9. IMPORTANT: Turn the Adjustment Knob (83)
until the Console Bracket (82) is in the most
vertical position.
While a second person holds the Console (5)
near the Console Bracket (82), connect the wires
on the Console to the Main Wire (41) and to the
Left and Right Pulse Wires (7, 8).
Insert the excess wire into the Console
Bracket (82).
Tip: Avoid pinching the wires. It may be
helpful to use a screwdriver with a shank at
least 6 in. (15 cm) long. Attach the Console (5)
to the Console Bracket (82) with four M4 x 15mm
Screws (63); start all the Screws, and then
tighten them.
41
83
5
7, 8
7, 8
63
63
82
Avoid pinching
the wires
10
10. Identify the Upper and Lower Bracket Covers
(20, 80), orient them as shown, and press them
together around the Console Bracket (82).
Tip: Avoid pinching the Left and Right Pulse
Wires (7, 8). Attach the Upper and Lower
Bracket Covers (20, 80) to the Console Bracket
(82) with two M4 x 15mm Screws (63).
Avoid
pinching the
Pulse Wires
(7, 8)
