9
7
4
39
92
Avoid pinching
the wires
28
8. Orient the Handlebar (39) as shown.
While a second person holds the Handlebar
(39) near the Upright (2), connect the wire on
the Console (4) to the Main Wire (42). Insert the
excess wire into the Upright.
Tip: Avoid pinching the Pulse Wires (28) in
the left and right sides of the Handlebar (39).
Slide the Handlebar onto the Upright (2),
while
inserting the Pulse Wires into the indicated
slots in the Upright.
Tip: Avoid pinching the wires.
Attach the
Handlebar (39) with two M10 x 70mm Button
Bolts (116) and two M10 Jam Nuts (89).
8
9. Attach the Console Cover (32) to the back of
the Console (4) with two M4 x 16mm Screws
(92).
9
4
32
92
4
89
116
2
Avoid pinching
the wires
28
42
39
Slot
Slot
7. Orient the Console (4) and the Handlebar (39)
as shown.
Connect the wires on the Console (4) to the
Pulse Wires (28).
Tip: Avoid pinching the wires.
Attach the
Console (4) to the Handlebar (39) with four M4
x 16mm Screws (92).
