Assembly Instructions
A.
Place the Front Post Ring (37) around the Front Post (6).
B.
Connect the Main Wire A and B.
C.
Fix the Front Post (
6
) to the Main Frame (
1
) and tighten with 4 x M8x15MM Allen bolts (
23
), 4 x
8MM Spring Washers (
22
), 2 x 8MM Washers (
21
) and 2 x 8MM Arc Washers (
24
).
D.
Attach the Front Post Cover (33L/R) to the Main Frame (1) and the Front Post Ring (37) with 3 x
ST4.2 x 15mm Phillips Screws (25).
E.
Remove the M5x50mm Philips Bolt and Washer (
78
) from the Tension Knob (
68
).
Note:
The M5x50mm Philips Bolt and Washer (
78
) is pre-assembled to the Tension Knob (
68
).
F.
Turn the Tension Knob (
68
) to Level 1 and connect the bottom of the tension knob with the hook as
shown in the diagram. Then attach the Tension Knob (
68
) to the Front Post (
6
) using 1 x M5x50mm
Philips Bolt and Washer (
78
).
Step 2
8