Power Connector:
The power connector is on the back, lower left of the unit. The input
range for the supply is 100 -240 VAC, 0.6A, 50/60Hz. Refer to page 31 for power con-
nector pinouts.
Bulb Brightness Adjuster:
The brightness adjuster adjusts the brightness of the bulbs. To
make an adjustment, turn the rubber adjuster with a mini flat head screwdriver.
Power Light:
The power light glows when the power is on.
Video Connector:
This 15-pin high-density female connector is used to connect the 3015
monitor to your computer's video output. Refer to page 31 for video connector pinouts.
Serial Touchscreen Connector:
If your display comes equipped with a touchscreen, you can
connect a cable between this connector and the COM1 or COM2 port on the com-
puter. Refer to page 32 for touchscreen connector pinouts. You must also load the ap-
propriate touchscreen driver. Refer to chapter 3 for installation instructions.
On Screen Display (OSD) Controls:
The on screen display video controls consist of four but-
tons and control brightness, contrast, color, and position adjustment. Refer to page 14
for more information on adjusting the display.
Product Overview
3
BR
IGH
T
PO
WE
R
SERIAL
PORT
VIDEO
–A
D
J
+
ENTER
MENU
On Screen Display
Video Connector
Bulb Brightness Adjuster
Power Connector
Serial Touchscreen
Power Light
Figure 2. I/O Panel.
