4. Copy the needed files to your computer or install them from the
Documentation
and Support Library CD
.
Note:
All touchs
creen units ship with the MS-DOS, Windows 3.x, Windows 95, Win-
dows NT, and Windows 2000 touchscreen drivers.
Note:
For Xycom/Touch-Base touchscreen systems, the UPDD driver must be installed
in Serial Mode. Simultaneous touch screen operation can be achieved by choosing two
touch devices, one on COM1 and the second on COM2, during installion. Separate cali-
bration will be required for each screen. Once installed, run the Pointer Device Control
Panel applet and select Help for details.
Calibrating the Touchscreen
If you need to recalibrate the touchscreen, refer to the sections in the touchscreen
manual that explain calibrating the touchscreen and using the diagnostic utility.
For Xycom/Touch-Base controllers, if you need to recalibrate the touchscreen, run the
Pointer Devices Control Panel applet. Select Help for details about calibrating. For best
results, use the 25 point calibration setting with Start In At set to 0.
You need to calibrate the touchscreen if
•
The cursor does not follow the movement of your finger or pen
•
You adjust the size of the video image or change the video mode
Operator Input
22
Touchware 3.4
Touchware 5.62
Touch-base/DOS
Touch-base/Windows
Microtouch
(Touchware)
Xycom
(Touch-base)
DOS
Windows
