17
Connect the power cord to the Power Connector using the Power Plug on the Rear of
the PS-G unit.
Power Cord Specifications
*1
If the Conductor
’
s end (individual) wires are not twisted correctly, the end
wires may either short against each other, or against an electrode.
Power Plug Specifications
Wiring
When connecting the Power Cord, use the following items when performing wiring. (Items
are made by Phoenix Contact.)
2
Wiring for the PS3600G-T41-24V unit (DC24V)
Power Cord Diameter
0.2 to 2.5mm
2
[0.0001 to 0.0097inch
2
]
(24 to 12 AWG)
Conductor Type
Simple or Twisted Wire
*1
Conductor Length
+
24V
−
0V
FG
Grounding Terminal connected to the PS-G.
• Be sure to twist the power cords, from the closer to the power plug.
• The power supply plug GMVSTBW2, 5/3-STF-7, 62 is made by
Phoenix Contact.
Recommended Driver
SZF 1-0.6x3.5 (1204517)
Recommended Pin Terminals
AI 0.25-6BU (3201291)
AI 0.34-8TQ (3200865)
AI 0.5-8WH (3200014)
AI 0.75-8GY (3200519)
AI 1-8RD (3200030)
AI 1.5-8BK (3200043)
AI 2.5-8BU (3200522)
Recommended Pin Terminal Crimp Tool CRIMPFOX ZA3 (1201882)
7mm
[0.28in.]
FG
-
+
Power Cord Insertion holes
