Pro-face PL-7900 Series, User Manual

Page: 86 / 104

7-5
PL-7900 Series User Manual
Maintenance and inspection
3) Remove the PL’s four chassis at-
tachment screws.
4) Remove the last two (2) attachment
screws. Next, hold both sides of the
PL’s front panel section and use
your thumbs to slide (push) the
chassis forward in the direction
shown here (see figure).
5) The chassis can then be pivoted
back and open. Remove the three
(3) attachment screws from inside
the cover.
Slide Forward
Top Face
!!!!!
Important
With a pre-installed PL-FD210
(can only be installed in the PL-
7900T), unscrew the attachment
screws and remove the unit.
With a pre-installed PL-
FD210, unscrew these at-
tachment screws to take
the unit out.
PL-FD210
Attachment
Screws