Pro-face PL-7900 Series, User Manual

Page: 58 / 104

4-7
PL-7900 Series User Manual
Installation and Wiring
2) Loosen and remove the middle three
screws from the terminal strip. Align
the crimp terminals with each screw
hole, and tighten the screws.
^
^
^
φφφφφ
3.2 mm or larger
Max. 6.0 mm
• The colors used in the
figure above are for the
cable which came with the
PL.
• This power cable is de-
signed only for AC100V/
115V use. Be sure to use a
different cable when using
other than AC100V/115V
power.
FG
L
N
FG
L
N
Black
White
Green/Yellow
Transparent
Cover
Attachment
Screws
3) Reattach the terminal strip’s trans-
parent cover and secure it in place
with its attachment screws.
• Crimp Terminal Types :
V1.25-3, by J.S.T. or equivalent
(JIS standard part number :
RAV1.25-3)
• Crimp terminals must be the
same as shown below.
Note:
!!!!!
Important