2
General Specifications
General Specifications
Electrical Specifications
Environmental Specifications
External Specifications
NOTE:
• Extending the length of the USB cable can degrade (weaken) signals, causing the potential for
errors. Do not extend the cable.
• Use only the SELV (Safety Extra-Low Voltage) circuit to connect the USB and Ethernet interface.
Connector type
Ethernet I/F
Modular jack (RJ-45), IEEE802.3i/IEEE802.3u,
10BASE-T/100BASE-TX
USB I/F
Type A (plug), USB 2.0 High-Speed (480 Mbps)
Po
we
r
sup
p
ly
Rated input voltage
5 Vdc (powered from USB bus)
Input voltage limits
4.75...5.25 Vdc
Power consumption
0.63 W or less
P
h
ysical e
n
viron
m
en
t
Ambient air operating
temperature
0...55 °C (32...131 °F)
Storage temperature
-20...60 °C (-4...140 °F)
Ambient air and storage
humidity
10...90% RH (non condensing, wet bulb temperature 39 °C
[102.2 °F] or less)
Dust
0.1 mg/m
3
(10
-7
oz/ft
3
) or less (non-conductive levels)
Pollution degree
For use in Pollution Degree 2 environment
Atmospheric pressure
(Operating altitude)
800...1,114 hPa (2,000 m [6,561 ft] or lower)
Mech
an
ic
al
en
vi
ro
nm
en
t
Vibration resistance
IEC/EN 61131-2 compliant
5...9 Hz Single amplitude 3.5 mm (0.14 in)
9...150 Hz Fixed acceleration: 9.8 m/s
2
X, Y, Z directions for 10 cycles (approximately 100 minutes)
Concussion resistance
IEC/EN 61131-2 compliant
(147 m/s
2
, X, Y, Z directions for 3 times)
El
ect
ri
ca
l
en
vi
ro
nm
en
t
Electrical fast transient/burst
IEC 61000-4-4
2 kV: Power port (display unit)
1 kV: Signal ports
Electrostatic discharge immunity
Contact Discharge Method: 6 kV
Air Discharge Method: 8 kV
(IEC/EN61000-4-2 Level 3)
External dimensions (W x H x D)
105 x 40 x 27 mm (4.13 x 1.57 x 1.06 in)
Cable length
0.5 m (1.64 ft) (including connections)
Weight
100 g (0.22 lb) or less
