LT Installation
66
z
The power plug is positioned vertically when the unit is vertically installed.
z
The unit is at least 100 mm (3.94 in.) away from adjacent structures and other
equipment for easier maintenance, operation, and improved ventilation:
Step
Action
1
Place the unit on a clean and level surface with the display panel facing
downward.
2
The support thickness depends on the material:
z
Steel sheet: between 1.5 and 6 mm (0.059 in. and 0.236 in.)
z
Plastic: between 3 and 6 mm (0.118 in. and 0.236 in.)
If the thickness is between 1 and 1.5 mm (0.039 in. and 0.059 in.) for a steel
sheet support or between 1 mm and 3 mm (0.039 in. and 0.118 in.) for plastic,
use the spacer supplied in accessory kit PFXZGMAK1 (sold separately).
3
Create the correct sized holes required to install the unit, using the Panel Cut-
Out Dimension and Installation
(see page 61)
.
Summary of Contents for LT series
