Pro-face LT series, Hardware Manual

Page: 61 / 143

LT-4201TM/4301TM Hardware Manual
61
Panel Cut-Out Dimensions and Installation
Inserting a Display Module Without an Anti-Rotation Tee
Create a panel cut-out and insert the display module into the panel from the front.
The figure shows the panel cut-out:
Dimensions
NOTE:
Without the tee option, the display module supports a rotating torque of
2.5 N•m (22.12 lb-in).
Inserting a Display Module With an Anti-Rotation Tee
Create a panel cut-out and insert the display module into the panel from the front.
The figure shows the panel cut-out for a LT using a tee:
A B (1) B (2)
22.50
0/-0.30
mm
(0.88
0/-0.01
in.)
1.5...6 mm
(0.06...0.23 in.) 3...6 mm
(0.11...0.23 in.)
(1)
Steel sheet
(2)
Glass fiber reinforced plastics (minimum GF30)
&
'